The Great Gatsby By F. Scott Fitzgerald - 947 Words

Fitzgerald wrote one of his most famous books The Great Gatsby, during the Age of Disillusionment. He focuses on the idea that everyone wants love, money, social class superiority,happiness, etc. The main American Dreams that Fitzgerald writes about are love and money. He shows that through his character s hopes and dreams. For example, Gatsby’s dream of being with Daisy and Nick’s hope for becoming rich; even though to Fitzgerald they are only myths. The American Dreams are to find love and get rich, however Fitzgerald believes that The American Dream can not be achieved. One of the American Dreams that Fitzgerald talks about is love. â€Å"He knew that when he kissed this girl, and forever wed his utterable visions to her perishable breath,...†(110). In The Great Gatsby, Gatsby is the dreamer who is in love with Daisy. â€Å"The officer looked at Daisy while she was speaking, in a way that every young wants to be looked at some time†¦Ã¢â‚¬ (75). Most ev eryone wants to find love in life. Gatsby found it, however it did not go as planned. Some people start out searching for love, and others are patient and let love find them. Love found Gatsby; he was trying to get rich when he met Daisy. Like many love stories it starts out great, but no story is a smooth ride. In Gatsby’s case it was unacceptable for a rich girl to marry a poor boy. However, once someone finds love they tend to want to hold on to it. Gatsby held on so tight that he kept it for five years after he last saw her andShow MoreRelatedThe Great Gatsby by F. Scott Fitzgerald1393 Words   |  6 PagesF. Scott Fitzgerald was the model of the American image in the nineteen twenties. He had wealth, fame, a beautiful wife, and an adorable daughter; all seemed perfect. Beneath the gilded faà §ade, however, was an author who struggled with domestic and physical difficulties that plagued his personal life and career throughout its short span. This author helped to launch the theme that is so prevalent in his work; the human instinct to yearn for more, into the forefront of American literature, where itRead MoreThe Great Gatsby By F. Scott Fitzgerald1343 Words   |  6 PagesHonors English 10 Shugart 18 Decemeber 2014 The Great Gatsby F. Scott Fitzgerald s 1925 novel The Great Gatsby is a tragic love story, a mystery, and a social commentary on American life. The Great Gatsby is about the lives of four wealthy characters observed by the narrator, Nick Carroway. Throughout the novel a mysterious man named Jay Gatsby throws immaculate parties every Saturday night in hope to impress his lost lover, Daisy Buchanan. Gatsby lives in a mansion on West Egg across from DaisyRead MoreThe Great Gatsby By F. Scott Fitzgerald1155 Words   |  5 PagesThe Great Gatsby The Jazz Age was an era where everything and anything seemed possible. It started with the beginning of a new age with America coming out of World War I as the most powerful nation in the world (Novel reflections on, 2007). As a result, the nation soon faced a culture-shock of material prosperity during the 1920’s. Also known as the â€Å"roaring twenties†, it was a time where life consisted of prodigality and extravagant parties. Writing based on his personal experiences, author F. ScottRead MoreThe Great Gatsby By F. Scott Fitzgerald1166 Words   |  5 Pagesin the Haze F. Scott Fitzgerald lived in a time that was characterized by an unbelievable lack of substance. After the tragedy and horrors of WWI, people were focused on anything that they could that would distract from the emptiness that had swallowed them. Tangible greed tied with extreme materialism left many, by the end of this time period, disenchanted. The usage of the literary theories of both Biographical and Historical lenses provide a unique interpretation of the Great Gatsby centered aroundRead MoreThe Great Gatsby by F. Scott Fitzgerald845 Words   |  3 PagesIn F. Scott Fitzgerald’s novel, The Great Gatsby, colors represent a variety of symbols that relate back to the American Dream. The dream of being pure, innocent and perfect is frequently associated with the reality of corruption, violence, and affairs. Gatsby’s desire for achieving the American Dream is sought for through corruption (Schneider). The American Dream in the 1920s was perceived as a desire of w ealth and social standings. Social class is represented through the East Egg, the WestRead MoreThe Great Gatsby By F. Scott Fitzgerald Essay970 Words   |  4 Pagesrespecting and valuing Fitzgerald work in the twenty-first century? Fitzgerald had a hard time to profiting from his writing, but he was not successful after his first novel. There are three major point of this essay are: the background history of Fitzgerald life, the comparisons between Fitzgerald and the Gatsby from his number one book in America The Great Gatsby, and the Fitzgerald got influences of behind the writing and being a writer. From childhood to adulthood, Fitzgerald faced many good andRead MoreThe Great Gatsby By F. Scott Fitzgerald2099 Words   |  9 Pagesauthor to mirror his life in his book. In his previous novels F. Scott Fitzgerald drew from his life experiences. He said that his next novel, The Great Gatsby, would be different. He said, â€Å"In my new novel I’m thrown directly on purely creative work† (F. Scott Fitzgerald). He did not realize or did not want it to appear that he was taking his own story and intertwining it within his new novel. In The Great Gatsby, by F. Scott Fitzgerald, he imitates his lifestyle through the Buchanan family to demonstrateRead MoreThe Great Gatsby By F. Scott Fitzgerald1607 Words   |  7 Pages The Great Gatsby is an American novel written in 1925 by F. Scott Fitzgerald. One of the themes of the book is the American Dream. The American Dream is an idea in which Americans believe through hard work they can achieve success and prosperity in the free world. In F. Scott Fitzgerald s novel, The Great Gatsby, the American Dream leads to popularity, extreme jealousy and false happiness. Jay Gatsby’s recent fortune and wealthiness helped him earn a high social position and become one of the mostRead MoreThe Great Gatsby By F. Scott Fitzgerald1592 Words   |  7 PagesMcGowan English 11A, Period 4 9 January 2014 The Great Gatsby Individuals who approach life with an optimistic mindset generally have their goals established as their main priority. Driven by ambition, they are determined to fulfill their desires; without reluctance. These strong-minded individuals refuse to be influenced by negative reinforcements, and rely on hope in order to achieve their dreams. As a man of persistence, the wealthy Jay Gatsby continuously strives to reclaim the love of hisRead MoreThe Great Gatsby By F. Scott Fitzgerald1646 Words   |  7 PagesThe 1920s witnessed the death of the American Dream, a message immortalized in F. Scott Fitzgerald’s The Great Gatsby. Initially, the American Dream represented the outcome of American ideals, that everyone has the freedom and opportunity to achieve their dreams provided they perform honest hard work. During the 1920s, the United States experienced massive economic prosperity making the American Dream seem alive and strong. However, in Fitzgerald’s eyes, the new Am erican culture build around that

Windows 7 Check Your Understanding Free Essays

Win7 Chapter 3 Knowledge Assessment Fill in the Blank Complete the following sentences by writing the correct word or words in the blanks provided. 1. An image file that contains an entire workstation configuration, including all applications, packages, and configuration settings, is called a thick image. We will write a custom essay sample on Windows 7 Check Your Understanding or any similar topic only for you Order Now 2. The two programs that make up the User State Migration Tool are called scanstate. exe and loadstate. exe. 3. A build-to-plan installation is one in which the installers capture a single image file and deploy it to each computer with no changes. 4. Windows Deployment Services can reduce network bandwidth requirements while deploying install images by using . wim files. 5. Before you can modify an offline image file using DISM. exe, you must mount the image to a folder. 6. To partition a disk using an answer file, you must add settings to the WindowsPE configuration pass. 7. The Windows 7 AIK tool that you use to create answer files is called Windows System Image Manager (SIM). 8. To boot from an image transmitted over the network by a WDS server, a workstation must have a network adapter that supports Preboot Execution Environment (PXE). 9. The deployment scenario in which you save a workstation’s user state data, wipe its disk, install Windows 7, and then restore the user state data is called the refresh computer scenario aka wipe and load. 10. A capture image enables a workstation to boot from a disk and connect to a WDS server. True / False 1. To perform a Windows 7 deployment using ZTI, you must have a SQL Server on your network. F 2. To create a capture image, you use the Deployment Workbench console. T 3. The Windows 7 AIK script files used to perform unattended installations are called task sequences. F 4. You can use the boot images created by Deployment Workbench to start workstations using either boot disks or WDS. T 5. The computer that you use to capture an image of a workstation configuration is called the target computer. F 6. An LTI deployment provides greater flexibility than a ZTI deployment. T 7. ImageX. exe is a command? line tool that you can use to capture and deploy image files. T 8. To use the upgrade computer scenario, a workstation must be running Windows XP SP2 or later. F 9. Before you can capture an image of a Windows 7 workstation, you must run the Sysprep. exe program. T 10. Sector? -based image files are spannable, editable, and bootable. F Review Questions 1. Describe the difference between an LTI and a ZTI deployment in terms of the activity at the target computer during the Windows 7 installation. LTI is lite touch deployment requires someone to sit there during installations and answer some questions where as ZTI is a zero touch installation is just that. The system installs without any one present at the workstation to monitor it. 2. List the five basic steps in an enterprise Windows 7 workstation deployment. Build a deployed share Perform a reference computer installation Capture an image of the reference computer Boot the target computers Apply the reference computer image How to cite Windows 7 Check Your Understanding, Papers

Business Law ACL

Question: Discuss about theBusiness Lawfor ACL. Answer: Introduction The legislature has got the authority to make laws for the safety of people and it should be developed keeping in mind the bars contained under the supreme law of land. The ACL was developed on as advised by the Ministry of consumer Affairs to present that it is uniform law made for the whole country. It is applicable in the all the jurisdictions following the same rules and policies. Ultimately, the provisions of this Act are made in respect of individuals and not in respect of any body of individuals. The creation of this law has not altered in any way the applicability of the Commonwealth or a State or Territory under the Australian Constitution. Meaning of Consumer Protection Consumer protection implies safeguarding the consumers and protecting them from the unethical practices of vendors. It means to adopt precautionary measures to protect the individuals from the wrong acts performed by traders and provide them with the remedy to address their grievances and dispose of the cases speedily. The consumers are harassed every day and it is the states duty to save them from the misconduct of traders. The numerous wrong activities which are done by traders these days include mixing toxic elements with the eatable items which is proved fatal for the health of people, selling of products which are not in consonance with the prescribed standards, sale of fake goods, selling the products to consumers using wrong weights, practicing black marketing to create changes in prices, charging high price than the MRP, sale of product not matching the quality and quantity shown in advertisements (Paterson Wong, 2014). Need for Consumer Protection The consumers are required to be safeguarded because it is the moral and legal duty of the State to push the businessmen and traders to adopt ethical approaches and help the consumers by giving them what they actually expect. There is a dire need to strengthen the awareness among consumers related to the rights available to consumers against any ill practice performed by the vendors. The consumer should be treated as the topmost priority of the vendors because they are the ones for whom the product is manufactured, to whom the product is sold and by whom the product is consumed and the traders must give right deal to them without performing any act of deception on them. The harassment of customers is against the law of every country and it is the duty of vendors not to perform any bad conduct that might exploit consumers. The consumers want to take full worth of their money and any act of deception might force them to lose faith in the market as well as the law of the country (Govern ment, 2012). The competitive advantage can be created by providing fair deals to consumers and vendors who perform malpractices lose their customers very easily because in todays era, almost every person is aware of his rights and can sue without hesitation. The law has provided speedy disposal of such cases which motivates the people more to address such cases. Historical Development of Consumer Law in Australia The Australian consumer law is the law of the country in favor of consumers, which is a uniform national law and encourages fair trade practices and is applicable uniformly throughout the whole country irrespective of the dividing territories. Due to this rule the traders all over the country are guided by the same rules and principles. With the introduction of this law, the productivity commission estimated the profit of $1-5 billion each year to the country. The creation of Australian consumer law has ended the other laws related to safeguarding the interests of consumers and now the uniform law is applicable in the whole of Australia. The idea of developing this law came to the government on the date 2 October 2008 on the idea propagated by the Ministry of Consumer Affairs and the Act came into force on 1 January, 2011. The Australian consumer law is a schedule to Competition and Consumer Act, 2010 and this is another name of the Trade Practices Act, 1974. This law runs across the country with the same application by all the tribunals and courts (Australia, 2016). However, the most important aspect which cannot go unnoticed is that the Australian Securities and Investments Commission Act 2001 is still subsisting and is absolutely valid, but the provisions which are not in conformity with ACL are redundant now. Consumer Protection Law in Australia The Australian Consumer Law (ACL) contains provisions regarding unjust terms of contract, rights available to consumers when deception is performed on them, addressing of issues against retailers and manufacturers, provisions regarding protection of health of consumers by protecting them from adulterated goods, uniform trade practices provisions for all the traders, compensation to consumers, alternative reliefs available to consumers when they are not satisfied by the verdict of consumer courts and replacement and repairs of products keeping in mind the aspect of warranty and guarantee (Commission, 2017). The ACL helps to maintain a healthy relationship of consumer and vendor. The consumer law prohibits the traders not to perform any kind of misconduct on the consumer that might harm his health. The same provision is given in the ASIC, Act but that is regarding finance. The law also prohibits the vendors to do any unconscionable act. This provision aids to curtail down the unethical and unjust acts done by traders on consumers. The law safeguards the consumers from illegal and immoral terms provided in the contract as entered by the parties. The contracts which we are talking about here are made by traders and the consumers have got the right to accept or refuse to accept the terms and conditions provided in the contract. The misrepresentation of facts in another wrong and this may be done in writing or verbally. The bait advertisements are a part of misrepresentation. Attracting the consumers with false gifts is one such aspect and should not be practiced because the interests of con sumers are the highest priority of consumers law. These provisions are given from section 18-35 of the Act. This law runs throughout the country in the same manner and no changes are mentioned for any specific jurisdictions. ACL is consistent at all the levels that are federal or state. The remedy which is given for the consumers to protect their rights made major amendments in 2011and since then consumers have got a huge number of rights which they can avail if in any manner they are not satisfied with the product delivered. The dealing sections are 259-277. Remedy against retailers: - If the consumers are not happy with the product then the option which is available to them is of replacement or repair. In this case, the consumers have the right to sue the traders to receive damages. In the case of services, the consumer can terminate the contract or demand compensation. Remedy against manufacturers: - As we all know that the consumers and manufacturers do not have an immediate nexus but they do have close connections. In case the consumer doesnt know about the whereabouts of manufacturer, he can ask the retailer and it is the duty of retailer to provide all the relevant information which may help consumers reach manufacturers. The products can be replaced or repaired or money can be demanded back. Warranty cards are now given by traders which help the consumers to get their product exchanged when it is returned within the prescribed time limit. The products should be brought back and it is not practical to bring them back in original packing so such loopholes are allowed (Government, 2013). If the health of the person gets affected by the consumption of goods or services or the same thing happens to the person in whom such person is interested, the compensation can be claimed by that person. Money can also be claimed if the property gets damaged by consuming goods. In case of death of the consumer, the heir or legal representative may file the claim. The provisions are mentioned under section 138- 145. It is the duty of retailer to provide information to a consumer when he inquires about manufacturers and just in case he fails to do so, consumers can consider him to be a manufacturer and ask for his claim (Corones, et al., 2016). The vendors are not always at fault and there are cases where consumers are also at fault. In recent times, many cases have been experienced regarding this aspect. So, various defenses are provided to vendors as well, which includes that the vendors are not responsible for any error that arises after the sale of products or any mistake which could have been addressed by consumers with due diligence, traders are not liable when the mistake is not under their control. (Section 142-147) The Australian Consumer Law deals with three things that cover remedies, powers, remedies and penalties. Performing malpractice on consumers is a civil wrong and compensation can be demanded for it. A number of times the license of vendors is taken away and he is prohibited to conduct business during a certain period of time or under certain areas. Presently, the traders just want to do one thing that is to earn maximum profits and more than their competitors. For this, they cross limits and start performing acts which they know is not morally sound, but they need to understand that adopting deception is not the criterion. This might be a criterion to earn easy profits, but this may lead traders to fall behind bars. It is the duty of government to conduct seminars and fares to create awareness among consumers regarding the rights available to them (Clements, 2016). This has proved out to be one of the most influential laws in all times as this has benefitted the country in huge monetary terms. Case Law: ACCC Versus TPG Internet Pty Ltd (2013 HCA 54) Section 18 of this Act and previously it was a part of theTrade Practices Act 1974under section 52 as we read above prohibits any act of deception on the consumers to mislead them. It also forbids the advertisements which lead the consumers in the wrong direction, so in this case High Court provided for the importance of this section that holds the consumers safe and many traders do not perform the misconduct because they are afraid of strict actions taken by the judiciary. The decision of the High Court inTPG provides that if the advertisement appears to be is misleading the consumers, which are in contradiction to s 18 of theACLshould be analyzed by the overall picture the ad exhibit and the circumstances in which it is shown. The overall substance of the ad should be taken into account and not the form of the advertisement. A huge number of judges in the High Court (French CJ, Crennan, Bell and Keane JJ; Gageler J dissenting) restored the monetary penalty of $2 million. It was hel d that the headlines of the ad may mislead the consumers so the whole ad should be seen carefully (Wickham, 2013). Conclusion It is very important for the government to make laws to ensure the safety of citizens. In the same way, it is the utmost duty of the judiciary to interpret the laws in the right manner and provide speedy relief to them. The law is made purely in respect of consumers with a few provisions in relation to retailers and manufacturers. So, the consumers should avail the rights available to them and if they dont, the whole law will stand useless. References Australia, C. o., 2016. Unfair contract terms: A guide for business and legal practitioners, Available at: https://www.cbs.sa.gov.au/assets/files/unfair_contract_Guide_ACL.pdf Clements, G., 2016. Australian consumer law review: Commonwealth of Australia. Commission, A. C. a. C., 2017. Consumer guarantees: What products and services are guaranteed?. [Online] Available at: https://www.accc.gov.au/consumers/consumer-rights-guarantees/consumer-guarantees Corones, S., Christensen, P., Malbon, J. Asher, A., 2016. Comparative analysis of overseas consumer policy frameworks: Commonwealth of Australia . Government, A., 2013. The Australian Consumer Law: A framework overview, Available at: https://consumerlaw.gov.au/files/2015/06/ACL_framework_overview.pdf Government, V., 2012. Australian Consumer Law and Fair Trading, Available at: https://www.legislation.vic.gov.au/domino/web_notes/LDMS/LTObject_Store/LTObjSt7.nsf/d1a8d8a9bed958efca25761600042ef5/1bae4607a706ddb8ca257ad800784a5b/$FILE/12-21a004bookmarked.pdf Paterson, J. Wong, V., 2014. Fine Print Disclaimers May Not Protect Advertising from being Misleading: Australian Competition and Consumer Commission v TPG Internet Pty Ltd, Available at: https://blogs.unimelb.edu.au/opinionsonhigh/tag/pecuniary-penalties/ Wickham, B., 2013. Australian competition and consumer commission v TPG internet Pty ltd: High court of Australia, Available at: https://www.hcourt.gov.au/assets/publications/judgment-summaries/2013/hca54-2013-12-12.pdf

Marketing channels and logistics Essay Example

Marketing channels and logistics Essay Marketing channels and logistics BY k3700026 1. Executive Summary This report is aimed at exploring the market channel and logistics in the case of SuperAlloy, the world-class provider of forged aluminum alloy wheel rims. Through the analysis of financial performance, the fluctuations of average selling days and inventory turnover are necessary to addressed. After the discussion, this report mentions three key, including the dilemma of collaboration in supply chain, breakthrough of market channels, deploying the system of logistics in China region. From the perspective of management, SuperAlloy should adapt external integration, estructure the supply chain collaboration, complete the breakthrough of market channels, highlight some KPIs, such as inventory turnover, average selling days, and the average time to generate first trial order for new customer or new design, and deploy the logistics of China regions. 2. The Discussion for Task 1 2. The market opportunity for the forged aluminum alloy wheel rims With the designs of energy-saving technology growing mature in automobile market, the forged aluminum alloy wheel rims have become the important component in future lightweight vehicle. The components of high-strength forged aluminum alloy could e used to reduce vehicle weight and enhance the engine efficiency. Therefore, the forged aluminum alloy wheel rims have played the key part in automotive supply chain (http://www. superalloy. tw/). The case company in this report is SuperAlloy, which has moved into the forged aluminum al loy wheel rims since 1997. We will write a custom essay sample on Marketing channels and logistics specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Marketing channels and logistics specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Marketing channels and logistics specifically for you FOR ONLY $16.38 $13.9/page Hire Writer The first three key suppliers of forged aluminum alloy wheel rims are Americas ACOA, Germanys Otto Fuch, and Taiwans SuperAlloy. In China, the first provider for article_content_12953. html). The market opportunity for forged aluminum alloy wheel rims results from technological bar inherent in the high-strength forged luminum alloy wheel rims ( http://www. superalloy. tw/). First, it stems from high specifications in automobile system regarding safety. Thereby, the providers of forged aluminum alloy wheel rims are often required to meet the criteria by way of innovation of manufacturing process or material technology. Second, the process of aforementioned innovation result in longer lead times before mass production. Accordingly, higher margins for the forged aluminum alloy wheel rims often cost the higher-than-normal expense of high-quality services from RD team and sales team. On the other hands, the management for market channel and logistics plays the critical position in the technology-intensive industry. 2. 2 The financial performances of SuperAlloy As the appendix describes, SuperAlloy is the Taiwans biggest closed-mold forge company and ranked as the third position in the global forged aluminum alloy wheel rims industry. Based on the published financial data on the website of http:// newmopsov. twse. com. tw/, this report reviews the financial performances of SuperAlloy from 2006 to 2011, trying to identifying the issues behind market channel and logistics. Table 1 The financial performances of SuperAlloy Year 2006 2007 2008 2009 2010 2011 sale (NTD OOOS) 2,223,755 3,579,541 2723,396 Margin(%) 30. 39 20. 98 2. 72 20. 95 22. 44 17. 2 Operating margin(%) 17. 13 10. 83 -6. 81 6. 83 5. 42 Debt ratio(%) 59. 36 60. 35 63. 72 24. 23 46. 51 Inventory turnovers 1 . 1 1. 89 2. 05 2. 66 2. 98 2. 14 Average selling days (Days) 278. 62 193. 12 178. 04 137. 21 122. 48 170. 56 Asset turnovers 0. 37 0. 48 0. 46 0. 39 0. 43 0. 49 Cash flow 63. 06 60. 42 12. 01 4. 8 1 . 44 -6. 17 2. 4 3. 45 2. 74 0. 64 -19. 58 3. 8 5. 95 4. 13 Source: http://newmopsov. twse. com. tw NA means the data cant be accessed. As shown in table 1, the sales from 2006 to 2008 indicate the strong growth momentum, while the margins and operating margins in the same period indicate that more revenue didnt mean more profit. In 2008, the inventory turnover, asset turnover and average selling days indicate the positive progress on management. Therefore, the negative ROA in 2008 could be attributed to the issue of negative margin. It suggests the necessary adjustments regarding cost efficiency. According to the management interview traced on the website of (http://store. gvm. com. tw/ article_content_12953. tml), the improvement of manufacturing process and staff quality has been under the focus of internal management. Compared with the data shown in the appendix, SuperAlloy began to deliver forged aluminum wheel rims to Jaguar Cars and Tesla Motors in April 2008. In October 2008, SuperAlloy won a Toyota TMS gold award. Hence, the factors resulting in the negative operating margin in 2008 could be related to the effects from financial tsunami and following issues regarding cost efficiency. The fluctuation in the period from 2009 to 2011 reflects another pattern. Even with the lower revenue than 2009, the outcomes in 2010, ncluding inventory turnover, average selling days, margin and operating margin, indicate the best signal since 2006. However, affected by cripple effects resulted from the European debt crisis, the performance in 2011 delivers the signal of another economic impulse surrounding a higher average selling days as well as a lower inventory turnover. Figure 1 The compassion among sales, margin, operating margin Source: This report Based on the analysis of DuPont formulate, a lower ROA could result from lower asset turnover, indicating poor management, lower operating margin, or a combination of oth factors. The trend displayed in figure 1 suggests the downtrend of ROA an ROE in fgure 2 should be focused on the operating management. As shown in table 1, there are two points which are necessary be highlighted. First, the lower inventory turnover of 2011 suggests the efficiency of logistics should be improved, reflecting some problems linked with manufacturing system and sale team. Second, the higher average selling days indicate the forecasts for brand customers orders should be adjusted to the dynamic of market, indicating the key issues behind market channel and regarding strategies. These issues could involve the identification of problems, the cooperation of cross-group cooperation, internal integration or external integration. These topics will be discussed in following sections of this report. Figure 2 The compassion among sales, ROES, ROAS in the past Source: This report Based on the previous analysis, there are some issues necessary to be addressed. The lower inventory turnover of 2011 suggests possible challenges confronted SuperAlloy. From the perspective of operation between sale team and manufacturing department, lower inventory turnover mean the misinformation in the process of ommunication between these two departments. The sale team should take the role to maintain customer relationship and Judge where is the equilibrium among the capability of manufacturing department and customers demands and criteria. Once customers demand could not fit the capacity or the present category of product. The outsourcing process should be moved on in order to provide the total solutions for the timing and immediacy of orders. Accordingly, in accordance with the lecture of Marketing Channels Logistics by Mike Bourlakis(2012), the efficiency of outsourcing process will be the issue to be discussed. Before the discussion, its important to realize the characteristics in automotive supply chain. For the purpose, this report collects the information from the in-depth interview by e-mails through personal relationship connecting to some senior manager in the regarding forging field. Based on the process cited on the website of http://www. ]yeh. com. tw and personal in-depth interview with the senior manager by e-mails, the manufacturing process of forged aluminum alloy wheel rims could be referred as the following sequence: 1. Order entry, 2. Mold design making, 3. Material incoming, 4. Material inspecting, . Making product sample, 6. Quality confirm by customer, 7. Cutting 8. Forging, 9. Edge cutting, 10. Heat treatment, 11. Vibration grinding, 12. Pickling, 13. Drilling surface grinding hole machining 14. Anodized or coating, 15. Finished product inspection, 16. Packing delivery. Above process highlights the longer lead time for new product innovation depends on the sequence from step 2 to step 6. The average lead time for the trial order of a new customer to a formal mass-producing order usually cost six months to 1 5 months, according to the in-depth interview through emails. The major threshold for enerating new orders results from the capability of dealing well with customers requirement, such as the strength of product, the design of the product as well as the flexibility of rapid responses for customers immediate need and ideas. Besides maintaining the customer relationship with existent clients, the main promotion of sale teams in the industry is through the all kinds of exhibitions around the world. design, the following orders of forged aluminum alloy wheel rims will grow at the pace of automotive growth momentum. Above process for building up customer relationship results in the higher-than-normal threshold for new providers. . 3. 1 The first key challenges : The dilemma of collaboration in supply chain From the perspective of automotive supply chain, the difficulty and complexity inherent in the technique of forging aluminum alloy drive the outsourcing process and following collaborations. Notwithstanding, there will still be the dilemma for the collaboration of supply chain confronting SuperAlloy. The dilemma derives from the differentials among different companies, heated up by the process of distribution of benefits in customers orders and the difference of profitability of different automotive components. Thus, the partnership in supply chain is like the game theory, demonstrated by the prisons dilemma. From the perspective of protecting intangible assets, the know-hows and techniques embedded in forged aluminum alloy wheel rims mean the capability of moving into a higher margin market. Inevitably, more robust partnership, more comprehensive understanding . t symbolizes the advantage of core competition decays with the collaboration going on. Hence, the concerns of keeping the uniqueness of techniques will drive the dilemma into next stage, since both parties want to keep the competitiveness in the market nd sustain the original customer relationship. Whereas the dynamic of collaboration depends on more bargaining assets which party holds, like technologies, producing capac ity, the certification of customer as well as the capability of generating orders. Accordingly, the first key challenge in front of SuperAlloy is to meet the the dilemma of collaboration in supply chain collaboration. . 3. 2 The second key challenges : The breakthrough of market channels Even with the insurance of automotive customers certification, the unstable sale growth momentum will be always existent. The ncertainty is reflected on the volatility of average selling days in table 1 . The issue behind the higher average selling days in 2011 should be linked with the global economic concerns. Once the sale team loosens the monitoring for global automotive market, the reliability of customers order forecast will be overestimated. It could lead to the lower inventory turnover and higher average selling days, along with the fluctuating margins driven by unexpected downtrend in the market. Under previous global economy, the market channels of SuperAlloy should react through innovation, integration or diversification of product portfolio. Based on the point of view, the breakthrough of market channel should be addressed . For the time being, the promotion through exhibition is the key channel to contact potential customers. However, the promotion should be involved with RD team and sale team to back up the following communication with customers. From the perspective of efficiency and accumulating the key human capital, the management of the market channel should rely on the scheme of the key performance indicators, to utilize the existent human resources. For SuperAlloy, the second key challenge is the breakthrough of market channel. Based on above characteristics of automotive supply chain, SuperAlloy should leverage its customer relationship to build up the solid partnership and flexibility of outsourcing or other external integration. Therefore, the objectives of breakthrough of market channel are to bring into solid collaboration, maintain the promotion. . 3. 3 The third key challenges : Deploying the system of logistics in China region Under previous global economy, the growth momentum of automotive market depends on the stimulus of policy of subsidies, guiding people to transfer from traditional vehicles to energy-saving vehicles. Combined with brand customers romotion, the demand of forged aluminum alloy wheel rims co uld be heated up. Nonetheless, it should be a long way to go. Whenever reviewing the growth momentum around the world, China automotive market shouldnt be missed. Notwithstanding, the cooperation with Chinese local partners is not always an easy task, due to the regulations inherent in cultures and Joint venture. The issue of managing the logistics and sustaining the customer relationship shouldnt be ignored. Once the distance between the different customers basements are longer than ever, the efficiency of managing people in the process of logistics become ritical to the global operation. As shown in figure 3 in the appendix, SuperAlloy is running the global operation. Nonetheless, how to strengthen the efficiency of logistics in China region should be addressed as a crucial decision-making process, including the indicators of measuring performance and assembling the logistics depending on potential customers demand. In sum, there will be three key challenges for SuperAlloy to deal with in the future. They are listed as following points: 1. The dilemma of the collaboration in supply chain, 2. The breakthrough of market channels, 3. Deploying the system of logistics in China region. . The Discussion for Task 2 3. The solution for the dilemma of collaboration in supply chain After above discussion, the following parts of this report will be focused on how to generate the solutions for aforementioned three challenges. As far as the first challenge is concerned, the solutions will include supply chain integration. According to the characteristics of forging industry, the swap of equity to build up the long term collaboration should be listed as the fir st priority. The first reason results from the culture of Taiwans supply chain companies, which usually focus on the control of decision-making process. If the partners are without cross-shareholding, the external integration would be possibly deterred by mutual trusts and interest conflicts inherent in supply chain mentioned as above. On the other hand, the negotiation of the swap of equity will bring in the dynamic of adjustments and evaluation from all kinds of standing points. Thereby, the equilibrium of new collaboration could be achieved by the trade-off of industrial dynamics and the right of control. From the perspective of supply chain integration, first comes who could be authorized to adjust the logistics, then second comes the evaluation of performances. The two ecessary step are dependent on the equilibrium of equity structure. After the two procedures, the external integration and internal integration could be reorganized under the leadership. Under above discussion, the first solution to the dilemma of collaboration in supply chain is to start the external integration, based on the building up of new leadership and equilibrium of equity structure. For the sake of considering the differentials of company culture and accelerating the speed of market channels Based on the external integration mentioned as above, the following step is to start the breakthrough of market channels. With the capacity and flexibility inherent in new partnership, the promotion of creating total solutions for customers could strengthen the capability of keeping customers orders and drawing the potential customers orders. Once the flexibility of selecting qualified orders is enlarged up, the product mix could also be more appropriate than ever to restructure market channels and adjust logistics. Notwithstanding, the success of breakthrough of market channels depends on the building up the key performance indicators (KPI). Compared with above discussion regarding table 1, inventory turnover and average elling days could be ranked as two primary KPIs. Besides them, the average time to generate first trial order for new customer or new design could be used as the KPI to measure the efficiency of integration between technological team and sale team. Reviewing the process of generating new order, average time to generate first trial order for new customer or new design will include the plan for exhibition, the forecast of market trends and initial survey of customers and potential customers. Once the outcome is longer than expected, then the necessary interview or adjustment should be carried out. Since average time to generate first trial order for new customer or new design is linked with the cooperation among members in both teams, the interaction among them could be under evaluation and immediate adjustments. 3. 3 The solution for deploying the system of logistics in China region After breakthrough of market channels, the customer relationship could be maintained efficiently. With the KPIs in previous discussion, the global operations around brand customers could be leveraged up in the deploying the system of logistics in China region. Under the differentials between Chinese enterprise ulture and Taiwan enterprise culture, the better way to deploying the system of logistics in China region is through the collective actions based on the new partnership. On the other hand, the logistics in China regions should be completed through the linkage with local relationship. The Joint venture with local critical family or key company will be reviewed as the must-be routine. Nonetheless, the past experiences in China region are not always profitable, due to the learning curve for local regulations and exclusive marketing channel. For the sake of utilization of xistent resources, the collective deployment under the external internal integration could shorten the adjustments , quickening the speed to fit customers demand in China regions. 4. Conclusions After the discussion in this report, the suggestions for SuperAlloy are listed as following point. The three key challenges are the dilemma of collaboration in supply chain, the breakthrough of market channels, deploying the system of logistics in China region. According to the analysis of arguments , the solutions for these challenges are stated as following. First, SuperAlloy should start the external supply hain integration, building up the new supply chain collaboration. Following that, SuperAlloy should restructure breakthrough of market channel, combining the management of KPIs in previous sections. Finally, SuperAlloy could utilize existent resources and partnership to deploy the logistics in China region. 1 . http://store. gvm. com. tw/article_content_12953. html 2. http://www. superalloy. tw/main. hp 3. http://newmopsov. twse. com. tw/ 4. http://www. gvm. com. tw/Boardcontent_12953_1 . html 5. http://www. autoinfo. gov. cn/autoinfo_cn/top/ydphb/index_ydphb. htm 6. http:// www. Jyeh. com. tw 7. Mike Bourlakis (2012), Marketing Channels Logistics,London: Brunel University. 6. Appendix: The company profile of SuperAlloy SuperAlloy , founded in 1994, has moved into the industry of forged wheel rims since 1997. From the perspective of revenue, SuperAlloy has created the sales of NTD 27. 5E in 2011, operating Taiwans biggest closed-mold forge. Nonetheless, from the point of the company history in the industry of forged wheel rims, the initial stage from 1997 to 2000 have almost run out of original accumulated capital until the influx of venture capital from IJMC group, which is ranked the second position of IC foundry http://store. gvm. com. tw/article_content_12953. html). After the experience of initial stage, the management of SuperAlloy have started to focused on the operating efficiency and regarding capital expenditures such as the plants and equipments for forged aluminum alloy wheel rims. Since then, SuperAlloy has gradually passed the threshold of automotive supply chain. From the points of sale growth, the sale of 2004 was Just above NTD 5 hundred million, whereas SuperAlloy delivered the sale of NTD 22 hundred million in 2006 (http://store. gvm. com. tw/article_content_12953. html). The growth momentum results from the orders from global auto brands, such as 6M, FORD as well as Chrysler. According to the information on the companys website of http://www. superalloy. tw, the critical milestones of company history from 2000 to 2011 are listed as following: 2011. 1 Won the TOYOTA QUALITY Platinum Award. 2011. 07 AS 7003 NADCAP Materials -resting certified. 2011. 03 Germany KBAnuvvehtcle -rest certification certified: KBA NO. 48288 (Truck wheel 22. 5 x 1 1. 75). 2011. 03 Won the 19th Taiwan Excellence Award (truck wheel TE0002). 2010. 08 Won Supplier Excellent Performance Award from Bureau of Foreign Trade. 2010. 08 Won Finishing Light Metal Article Equipment and Metho ds NO. US007785452B2 U. S. patent. 2010. 06 AS9100 certified, supply Forging to AIDC Aerospace. 2010 The company get Honda, Land Rover, AMG Forged Wheel Program Awarded. 009. 07 The company by raising an additional NT$187 million in cash, with its capital increased to NT$2. 17 billion. 2009. 07 Opel Insignia OPC Forged Wheel Supplier. 2008. 04 The company began supplying forged aluminum wheel rims to Jaguar Cars and Tesla Motors. 2008. 10 In October 2008, SuperAlloys designs won customer recognition and a Toyota TMS gold award. 2007. 6 The company obtained Ford QI . 2007. 10 The company recapitalized undistributed earnings in the amount of NTD140. 5 million, bringing its paid-in capital to NTDI . 7655 billion, with a staff of 2006. 6 Phase 2 of Plant 2 was completed and the factory went into production. 2006. 10 The company expanded its plants and purchased additional equipment by raising NTD900 million in cash through issuing new shares at a premium of NTD700 million, with the comp anys paid-in capital increased to NTDI . 625 billion and its shares traded on the emerging stock market. 2006. 11 The company began shipping wheel rims to Chrysler. 006. 11 The company hired new employees in the month to the end of 2006 to increase its workforce to 1006, with a new golf head end customer added to its customer base: 2005. 1 The company expanded its plants and purchased additional equipment by raising an additional NTD360 million in cash by issuing new shares . 2005. 01 The company expanded its plants and purchased additional equipment by raising an additional NT$360 million in cash by issuing new shares at a premium of NT$135 million, with paid-in capital increased to NT$I . 425 billion. As of the end of 2005, the companys employees had increased to 874. 2005. 1 The company added a new golf head end customer 2004. 05 The company began shipping wheel rims to Ford. 2004. 6 the company purchased additional fixed assets and built Plant 2 by raising an additional NTD128 m illion in cash through issuing new shares at a premium of NTD48 million, with its capital increased to NTDI . 08 billion. 2004. 08 Phase I of Plant 2 was completed, with machines installed and production begun. 2004. 12 Plants were expanded and additional equipment purchased by raising an additional NT$192 million in cash through issuing new shares at a premium of NTD72 million, with paid- in capital increased to NTDI . billion and employees increased to 346. 2003. 5 The company purchased additional fixed assets and built Plant 2 by raising an additional NTD200 million in cash through issuing new shares, with its capital increased to NTD 1 billion and employees increased to 270. 2002. 07 The company purchased additional fixed assets by raising an additional NTDI 72. 3 million in cash through issuing new shares, with its capital increased to NTD 800 million and employees increased to 210. 2001. 09 The company purchased additional fixed assets by raising an additional NT$IOO million i n cash through issuing new shares, with the total paid- n capital increased to NTD 627. million and employees increased to 147. 2001. 11 The company began shipping wheel rims to GM. 0 2000. 05 The company purchased additional fixed assets and built Plant 1 by raising an additional NT$300 million through issuing new shares and NT$29. 7 million through earnings recapitalization. The companys capital was increased to NTD527. 7 million and was renamed SuperAlloy Industrial Co. , Ltd. 2000. 11 Plant 1 was completed and inaugurated , with employees increased to 116. Figure 3 The global operating basements of SuperAlloy Source: http://www. superalloy. tw/main. php

Free Essays on English As The Official Language Of The US

There is a continuing debate among politicians and political groups about whether or not English should be made the official language of the United States. This change would mean that all government services and documents (ballots, driver’s license tests) would be available only in English. Supporters of this policy are anxiously waiting to see whether or not The English Language Unity Act of 2003 is officially implemented into the Federal government (4). I am opposed to this implementation and in the following paragraphs, I hope to convince you that making English the official language of the US is not only irrational, but also that if implemented, it could adversely affect the quality of our culture. According to an article by Deborah Schildraut (1), 26 US states have already declared English as their official language and that several surveys have shown that more than 80% of Americans support the notion. However, these Americans may not be considering the fact that social and cultural environments do tend to vary from state to state and the potential cultural repercussions. There are some states that couldn’t possibly have English as their official language because of their immigrant population. How fair would it be to only print election ballots in English in a state that hosts entire communities and even cities of non-English speakers? A news story published in The Associated Press (2) reveals how The English Language Unity Act would in fact violate Civil Rights Act of 1964. The article tells about a woman named Martha Sandoval who sued home state of Alabama for not allowing her to take her drivers license test in her first language of Spanish. She won on the grounds that The Civil Rights Act of 1964 states that no organization may â€Å"discriminate based on race, color, religion, sex, or national origin.† This story gives warning of many similar cases that would ensue if English were made the official language of the US. ... Free Essays on English As The Official Language Of The US Free Essays on English As The Official Language Of The US There is a continuing debate among politicians and political groups about whether or not English should be made the official language of the United States. This change would mean that all government services and documents (ballots, driver’s license tests) would be available only in English. Supporters of this policy are anxiously waiting to see whether or not The English Language Unity Act of 2003 is officially implemented into the Federal government (4). I am opposed to this implementation and in the following paragraphs, I hope to convince you that making English the official language of the US is not only irrational, but also that if implemented, it could adversely affect the quality of our culture. According to an article by Deborah Schildraut (1), 26 US states have already declared English as their official language and that several surveys have shown that more than 80% of Americans support the notion. However, these Americans may not be considering the fact that social and cultural environments do tend to vary from state to state and the potential cultural repercussions. There are some states that couldn’t possibly have English as their official language because of their immigrant population. How fair would it be to only print election ballots in English in a state that hosts entire communities and even cities of non-English speakers? A news story published in The Associated Press (2) reveals how The English Language Unity Act would in fact violate Civil Rights Act of 1964. The article tells about a woman named Martha Sandoval who sued home state of Alabama for not allowing her to take her drivers license test in her first language of Spanish. She won on the grounds that The Civil Rights Act of 1964 states that no organization may â€Å"discriminate based on race, color, religion, sex, or national origin.† This story gives warning of many similar cases that would ensue if English were made the official language of the US. ...

Questions to Ask When Writing an Essay. EssaySupply.com

Questions to Ask When Writing an Essay Questions to Ask When Writing an Essay Most teachers do not make use of a very important aspect of writing essays and papers. And that aspect is that the student should ask him/herself questions as a pre-writing preparation. Asking these questions will ultimately result in a better piece of writing. So, here are questions you should ask yourself as you get ready to write any essay or paper. Topic You may have a general topic area but within that topic area, you will need to select a smaller sub-topic for your essay or paper. Here is what you need to ask yourself: What sub-topic will interest me the most? Check through your text and lecture notes for topic ideas, and pick one in which you have good interest. Writing an essay or paper on a topic you don’t like is like getting a root canal – painful, very painful! Is there enough information on the topic to fulfill the length requirement? If you need an 8-page paper on the Civil War, the Battle of Antietam will probably not cut it. Before you finalize your topic, check out what’s available for resource information. Thesis Statement Every essay or paper has to have a thesis statement. So, here is what you need to ask as you formulate that statement: Why is it important for the reader to know this? What is the main point I am trying to make? What is my opinion about this topics? Resources There may be a large number of potential resources to use, but they are not all created equal. By the time you are in college, you can dump the idea of using encyclopedias of any kind. They are not appropriate for the type of research expected of you. So, here are your questions? Is the author of this book or journal article considered an expert on this topic? Can I find and use primary resources on this topic? If I have to use only secondary resources, are these the most current and relevant? Choose your resources wisely – your professor will expect them to be of high quality. Organizing Your Information Before you make an outline for writing, ask yourself the following: Should the information or data be organized sequentially? In what order should the points I make be given? Most important to least important, or the other way around? After the Rough Draft is Finished You know you are not going to turn in the first draft of whatever you write. You have to review it and fix your errors – structural and grammatical. So, as you read through that draft, ask yourself the following: Do I have a logical flow of the points I am making? Do I have good transitional sentences between paragraphs and, for longer works, sections? Have I varied the length of my sentences? Does my introduction begin with something that will capture the reader’s attention right away? Have I stated my thesis in the introduction and made it very clear? Have I used spell and grammar checkers to catch errors? Asking the right questions gets you to a â€Å"better place† in your writing and, ultimately a better grade. If you have any concerns about your topic, resources, or the quality of your writing, send it over to some good  custom writing services like for a full review and edit. It will be returned to you polished and ready to go!

Instructional Technology Paper Research Example | Topics and Well Written Essays - 750 words

Instructional Technology - Research Paper Example its of technology in classrooms and schools have opened up an interactive learning environment for the students where they can learn more quickly and effectively. One cannot deny the impact of technological advancements on the educational sector of any specific country. In this paper, we will explore the use of technology in instructional delivery at a nursing school. The nursing school, where I made a call in order to gather information regarding use of technology, is Catholic University of America’s school of nursing. I had a telephonic conversation with the registrar of CUA, who helped me collect useful information about use of technology in instructional delivery. The list of technological equipment used by the instructors of the school includes televisions, internet, microphones, and projectors. Let us discuss how instructors make use of these technological equipments in nursing classrooms. Instructors of CUA’s school of nursing use televisions to show how healthcare practitioners provide treatments to their patients. The professors show documentaries on different aspects of nursing and treatments. During the conversation, the registrar told me that televisions really help teachers in providing relevant and up to date information to the students. The documentaries help the students gather information about elderly nursing care programs, old and latest nursing equipment, and different treatments. The hardware requirement for this mode of instructional delivery is television, DVD player, and documentaries. The instructors need to be proficient in use of all of these equipments in order to make the students learn effectively. The instructors also make use of web-based method of instructional delivery. For this purpose, the instructors take students to the internet labs where they can search information related to various nursing techniques and treatments. The web-based instructional mechanism is very effective as it provides high level of interactivity